时间：2021-07-01 10:21:17 帮助过：20人阅读
由于上一篇的rac安装，截图较多，这一篇选择以txt的方式叙述，另外上一篇的时间比较久远，这里最近从新安装
--2018-10-29
[root@rac1 yum.repos.d]# lsb_release -a
LSB Version: :base-4.0-amd64:base-4.0-noarch:core-4.0-amd64:core-4.0-noarch:graphics-4.0-amd64:graphics-4.0-noarch:printing-4.0-amd64:printing-4.0-noarch
Distributor ID: CentOS
Description: CentOS release 6.5 (Final)
Release: 6.5
Codename: Final
[root@rac1 yum.repos.d]# uname -r
2.6.32-431.el6.x86_64
[root@rac1 ~]# ls -l /dev/cdrom |grep cdrom
lrwxrwxrwx. 1 root root 3 Oct 26 2018 /dev/cdrom -> sr0
[root@rac1 ~]# mount -t iso9660 /dev/cdrom /mnt/
mount: block device /dev/sr0 is write-protected, mounting read-only
[root@rac1 ~]# cd /etc/yum.repos.d/
[root@rac1 yum.repos.d]# mv CentOS-Base.repo CentOS-Base.repo.bk
[root@rac1 yum.repos.d]# vim public-yum-ol6.repo
[root@rac1 yum.repos.d]# cat public-yum-ol6.repo
[ol6_latest]
name=CentOS6 $releasever Latest ($basearch)
gpgkey=file:///mnt/RPM-GPG-KEY-CentOS-6
baseurl=file:///mnt
gpgcheck=1
enabled=1
[root@rac1 yum.repos.d]# yum clean all
[root@rac1 yum.repos.d]# yum makecache
[root@rac1 yum.repos.d]# yum install lrzsz -y
[root@rac1 opt]# vi /etc/sysconfig/selinux
[root@rac1 opt]# setenforce 0
[root@rac1 opt]# service iptables stop
iptables: Setting chains to policy ACCEPT: filter [ OK ]
iptables: Flushing firewall rules: [ OK ]
iptables: Unloading modules: [ OK ]
[root@rac1 opt]# chkconfig iptables off
[root@rac1 opt]# /usr/sbin/groupadd -g 1000 oinstall
[root@rac1 opt]# /usr/sbin/groupadd -g 1020 asmadmin
[root@rac1 opt]# /usr/sbin/groupadd -g 1021 asmdba
[root@rac1 opt]# /usr/sbin/groupadd -g 1022 asmoper
[root@rac1 opt]# /usr/sbin/groupadd -g 1031 dba
[root@rac1 opt]# /usr/sbin/groupadd -g 1032 oper
[root@rac1 opt]# useradd -u 1100 -g oinstall -G asmadmin,asmdba,asmoper,oper,dba grid
[root@rac1 opt]# useradd -u 1101 -g oinstall -G dba,asmdba,oper oracle
[root@rac1 opt]# mkdir -p /u01/app/11.2.0/grid
[root@rac1 opt]# mkdir -p /u01/app/grid
[root@rac1 opt]# mkdir /u01/app/oracle
[root@rac1 opt]# chown -R grid:oinstall /u01
[root@rac1 opt]# chown oracle:oinstall /u01/app/oracle
[root@rac1 opt]# chmod -R 775 /u01/
[root@rac1 ~]# passwd grid
[root@rac1 ~]# passwd oracle
[root@rac1 opt]# grep MemTotal /proc/meminfo
MemTotal: 3088656 kB
[root@rac1 opt]# vi /etc/sysctl.conf
[root@rac1 opt]# sysctl -p
[root@rac1 opt]# vim /etc/security/limits.conf
[root@rac1 opt]# vi /etc/pam.d/login
[root@rac1 yum.repos.d]# echo "nameserver 8.8.8.8" >> /etc/resolv.conf
[root@rac1 yum.repos.d]# echo "DNS1=8.8.8.8" >> /etc/sysconfig/network-scripts/ifcfg-eth0
yum install gcc gcc-c++ libaio* glibc* glibc-devel* ksh libgcc* libstdc++* libstdc++-devel* make sysstat \
unixODBC* compat-libstdc++-33.x86_64 elfutils-libelf-devel glibc.i686 compat-libcap1 smartmontools unzip openssh* parted cvuqdisk -y
[root@rac1 ~]# yum install ntpdate -y
[root@rac1 ~]# ntpdate time.windows.com
[root@rac1 ~]# date
yum install xterm xclock -y
[root@rac1 ~]# vim /etc/hosts
#Public IP
10.15.7.11 rac1
10.15.7.12 rac2
#Private IP
172.168.1.18 rac1priv
172.168.1.19 rac2priv
#Virtual IP
10.15.7.13 rac1vip
10.15.7.14 rac2vip
#Scan IP
10.15.7.15 racscan
[root@rac1 ~]# cat /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=rac1
GATEWAY=10.15.4.1
[root@rac1 ~]# vim .bash_profile
umask 022
DISPLAY=10.15.7.115:0.0 ; export DISPLAY
HISTTIMEFORMAT="%Y:%M:%D %H-%m-%s"
export=HISTTIMEFORMAT
[root@rac1 ~]# source .bash_profile
[grid@rac1 ~]$ cat .bash_profile
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
export TMP=/tmp
export TMPDIR=$TMP
export ORACLE_SID=+ASM1
export ORACLE_BASE=/u01/app/grid
export ORACLE_HOME=/u01/app/11.2.0/grid
export PATH=/usr/sbin:$PATH
export PATH=$ORACLE_HOME/bin:$PATH
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
export CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib
umask 022
[root@rac1 ~]# su - oracle
[oracle@rac1 ~]$ vi .bash_profile
[root@rac1 ~]# cat /home/oracle/.bash_profile
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
export TMP=/tmp
export TMPDIR=$TMP
export ORACLE_SID=bol1
export ORACLE_UNQNAME=bol
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=$ORACLE_BASE/product/11.2.0/db_1
export TNS_ADMIN=$ORACLE_HOME/network/admin
export PATH=/usr/sbin:$PATH
export PATH=$ORACLE_HOME/bin:$PATH
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
$ source .bash_profile使配置文件生效
[root@rac1 ~]# source /home/grid/.bash_profile
[root@rac1 ~]# source /home/oracle/.bash_profile
克隆并配置虚拟主机rac2 或者重新配置rac2
[root@rac2 ~]# cat /home/grid/.bash_profile
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
export TMP=/tmp
export TMPDIR=$TMP
export ORACLE_SID=+ASM2
export ORACLE_BASE=/u01/app/grid
export ORACLE_HOME=/u01/app/11.2.0/grid
export PATH=/usr/sbin:$PATH
export PATH=$ORACLE_HOME/bin:$PATH
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
export CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib
umask 022
export PATH
[root@rac2 ~]# cat /home/oracle/.bash_profile
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export TMP=/tmp
export TMPDIR=$TMP
export ORACLE_SID=bol2
export ORACLE_UNQNAME=bol
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=$ORACLE_BASE/product/11.2.0/db_1
export TNS_ADMIN=$ORACLE_HOME/network/admin
export PATH=/usr/sbin:$PATH
export PATH=$ORACLE_HOME/bin:$PATH
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
export PATH
各节点生成Keys：
[root@rac1 ~]# su - oracle
[oracle@rac1 ~]$ mkdir ~/.ssh
[oracle@rac1 ~]$ chmod 700 ~/.ssh
[oracle@rac1 ~]$ ssh-keygen -t rsa
[oracle@rac1 ~]$ ssh-keygen -t dsa
[root@rac2 ~]# su - oracle
[oracle@rac2 ~]$ mkdir ~/.ssh
[oracle@rac2 ~]$ chmod 700 ~/.ssh
[oracle@rac2 ~]$ ssh-keygen -t rsa
[oracle@rac2 ~]$ ssh-keygen -t dsa
在节点1上进行互信配置：
[oracle@rac1 ~]$ touch ~/.ssh/authorized_keys
[oracle@rac1 ~]$ cd ~/.ssh
[oracle@rac1 .ssh]$ ssh rac1 cat ~/.ssh/id_rsa.pub >> authorized_keys
[oracle@rac1 .ssh]$ ssh rac2 cat ~/.ssh/id_rsa.pub >> authorized_keys
[oracle@rac1 .ssh]$ ssh rac1 cat ~/.ssh/id_dsa.pub >> authorized_keys
[oracle@rac1 .ssh]$ ssh rac2 cat ~/.ssh/id_dsa.pub >> authorized_keys
在rac1把存储公钥信息的验证文件传送到rac2上
[oracle@rac1 .ssh]$ pwd
/home/oracle/.ssh
[oracle@rac1 .ssh]$ scp authorized_keys oracle@10.15.7.12:/home/oracle/.ssh/.
设置验证文件的权限
在每一个节点执行：
$ chmod 600 ~/.ssh/authorized_keys
启用用户一致性
在你要运行OUI的节点以oracle用户运行(这里选择rac1)：
[oracle@rac1 .ssh]$ exec /usr/bin/ssh-agent $SHELL
[oracle@rac1 .ssh]$ ssh-add
Identity added: /home/oracle/.ssh/id_rsa (/home/oracle/.ssh/id_rsa)
Identity added: /home/oracle/.ssh/id_dsa (/home/oracle/.ssh/id_dsa)
验证ssh配置是否正确
以oracle用户在所有节点分别执行：
ssh rac1 date
ssh rac2 date
ssh rac1priv date
ssh rac2priv date
===========
[oracle@rac1 .ssh]$ su - grid
Password:
[grid@rac1 ~]$ mkdir ~/.ssh
[grid@rac1 ~]$ ssh-keygen -t rsa
[grid@rac1 ~]$ ssh-keygen -t dsa
[grid@rac1 ~]$ chmod 700 ~/.ssh
[oracle@rac2 .ssh]$ su - grid
Password:
[grid@rac2 ~]$ mkdir ~/.ssh
[grid@rac2 ~]$ ssh-keygen -t rsa
[grid@rac2 ~]$ ssh-keygen -t dsa
[grid@rac2 ~]$ chmod 700 ~/.ssh
[grid@rac1 ~]$ touch ~/.ssh/authorized_keys
[grid@rac1 ~]$ cd ~/.ssh
[grid@rac1 .ssh]$ ssh rac1 cat ~/.ssh/id_rsa.pub >> authorized_keys
[grid@rac1 .ssh]$ ssh rac2 cat ~/.ssh/id_rsa.pub >> authorized_keys
[grid@rac1 .ssh]$ ssh rac1 cat ~/.ssh/id_dsa.pub >> authorized_keys
[grid@rac1 .ssh]$ ssh rac2 cat ~/.ssh/id_dsa.pub >> authorized_keys
[grid@rac1 .ssh]$ scp authorized_keys grid@rac2:/home/grid/.ssh/.
[grid@rac1 .ssh]$ exec /usr/bin/ssh-agent $SHELL
[grid@rac1 .ssh]$ ssh-add
Identity added: /home/grid/.ssh/id_rsa (/home/grid/.ssh/id_rsa)
Identity added: /home/grid/.ssh/id_dsa (/home/grid/.ssh/id_dsa)
[grid@rac1 .ssh]$
ssh rac1 date
ssh rac2 date
ssh rac1priv date
ssh rac2priv date
[grid@rac2 .ssh]$
ssh rac1 date
ssh rac2 date
ssh rac1priv date
ssh rac2priv date
udev方式
[root@rac1 ~]# cat /etc/issue
CentOS release 6.5 (Final)
Kernel \r on an \m
[root@rac1 ~]# echo "options=--whitelisted --replace-whitespace" >> /etc/scsi_id.config
[root@rac1 ~]# for i in b c d e f g;
> do
> echo "KERNEL==\"sd*\", BUS==\"scsi\", PROGRAM==\"/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/\$name\", RESULT==\"`/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/sd$i`\", NAME=\"asm-disk$i\", OWNER=\"grid\", GROUP=\"asmadmin\", MODE=\"0660\"" >> /etc/udev/rules.d/99-oracle-asmdevices.rules
> done
===
for i in b c d e f g;
do
echo "KERNEL==\"sd*\", BUS==\"scsi\", PROGRAM==\"/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/\$name\", RESULT==\"`/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/sd$i`\", NAME=\"asm-disk$i\", OWNER=\"grid\", GROUP=\"asmadmin\", MODE=\"0660\"" >> /etc/udev/rules.d/99-oracle-asmdevices.rules
done
===
[root@rac1 ~]# cat /etc/udev/rules.d/99-oracle-asmdevices.rules
KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1ATA_VBOX_HARDDISK_VBae01435a-3e52303e", NAME="asm-diskb", OWNER="grid", GROUP="asmadmin", MODE="0660"
KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1ATA_VBOX_HARDDISK_VB714cf53b-64b30d94", NAME="asm-diskc", OWNER="grid", GROUP="asmadmin", MODE="0660"
KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1ATA_VBOX_HARDDISK_VBdbf678d2-9ce1dd68", NAME="asm-diskd", OWNER="grid", GROUP="asmadmin", MODE="0660"
KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1ATA_VBOX_HARDDISK_VBfe506a5f-89a411c1", NAME="asm-diske", OWNER="grid", GROUP="asmadmin", MODE="0660"
KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1ATA_VBOX_HARDDISK_VB0b346c6a-a4a60e78", NAME="asm-diskf", OWNER="grid", GROUP="asmadmin", MODE="0660"
KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1ATA_VBOX_HARDDISK_VB9a904921-a5958d54", NAME="asm-diskg", OWNER="grid", GROUP="asmadmin", MODE="0660"
[root@rac1 ~]# /sbin/start_udev
Starting udev: [ OK ]
[root@rac1 ~]# ls -l /dev/asm*
brw-rw---- 1 grid asmadmin 8, 16 Oct 29 08:15 /dev/asm-diskb
brw-rw---- 1 grid asmadmin 8, 32 Oct 29 08:15 /dev/asm-diskc
brw-rw---- 1 grid asmadmin 8, 48 Oct 29 08:15 /dev/asm-diskd
brw-rw---- 1 grid asmadmin 8, 64 Oct 29 08:15 /dev/asm-diske
brw-rw---- 1 grid asmadmin 8, 80 Oct 29 08:15 /dev/asm-diskf
brw-rw---- 1 grid asmadmin 8, 96 Oct 29 08:15 /dev/asm-diskg
[root@rac2 ~]# ls -l /dev/asm*
brw-rw---- 1 grid asmadmin 8, 16 Oct 29 08:19 /dev/asm-diskb
brw-rw---- 1 grid asmadmin 8, 32 Oct 29 08:19 /dev/asm-diskc
brw-rw---- 1 grid asmadmin 8, 48 Oct 29 08:19 /dev/asm-diskd
brw-rw---- 1 grid asmadmin 8, 64 Oct 29 08:19 /dev/asm-diske
brw-rw---- 1 grid asmadmin 8, 80 Oct 29 08:19 /dev/asm-diskf
brw-rw---- 1 grid asmadmin 8, 96 Oct 29 08:19 /dev/asm-diskg
[root@rac1 opt]# unzip p13390677_112040_Linux-x86-64_3of7.zip
/usr/bin/xterm -ls -display $DISPLAY
=[INS-41104]存在找不到private网卡，
几番试过之后，把eth1删除，然后重启，ifconfig找到eth1的hwaddr，cp eth0 eth1 ,并修改hwaddr和ipaddr，device，name，注释uuid
结果如下
===
[root@rac1 ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
TYPE=Ethernet
UUID=7e047ed1-c530-478f-8704-65565ac802ab
ONBOOT=yes
NM_CONTROLLED=yes
BOOTPROTO=none
HWADDR=08:00:27:0E:DE:0E
IPADDR=10.15.7.11
PREFIX=22
GATEWAY=10.15.4.1
DNS1=8.8.8.8
DEFROUTE=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NAME="System eth0"
[root@rac1 ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth1
DEVICE=eth1
TYPE=Ethernet
#UUID=7e047ed1-c530-478f-8704-65565ac802ab
ONBOOT=yes
NM_CONTROLLED=yes
BOOTPROTO=none
HWADDR=08:00:27:8A:F5:38
IPADDR=1.1.1.1
PREFIX=22
GATEWAY=10.15.4.1
DNS1=8.8.8.8
DEFROUTE=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NAME="System eth1"
[root@rac2 ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
TYPE=Ethernet
UUID=288aa282-1d1f-4578-bd6a-1b45a48892b1
ONBOOT=yes
NM_CONTROLLED=yes
BOOTPROTO=none
HWADDR=08:00:27:33:6D:5A
IPADDR=10.15.7.12
PREFIX=22
GATEWAY=10.15.4.1
DEFROUTE=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NAME="System eth0"
DNS1=8.8.8.8
[root@rac2 ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth1
DEVICE=eth1
TYPE=Ethernet
#UUID=288aa282-1d1f-4578-bd6a-1b45a48892b1
ONBOOT=yes
NM_CONTROLLED=yes
BOOTPROTO=none
HWADDR=08:00:27:DC:E4:01
IPADDR=1.1.1.2
PREFIX=22
GATEWAY=10.15.4.1
DEFROUTE=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NAME="System eth1"
DNS1=8.8.8.8
=======
[root@rac1 ~]# cat /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
10.15.7.11 rac1
1.1.1.1 rac1priv
10.15.7.13 rac1vip
10.15.7.12 rac2
1.1.1.2 rac2priv
10.15.7.14 rac2vip
10.15.7.15 scanip
两节点进行ping测试，分别ping“公有IP”和“私有IP”，两节点ping通正常后，按如下方式配置：
[root@rac1 ~]# ping 1.1.1.2
[root@rac1 ~]# ping 10.15.7.12
[root@rac1 ~]# ping rac2priv
[root@rac2 ~]# ping 1.1.1.1
[root@rac2 ~]# ping 10.15.7.11
[root@rac2 ~]# ping rac1priv
ssh rac1 date
ssh rac2 date
ssh rac1priv date
ssh rac2priv date
# yum install -y ksh
[root@rac2 opt]# rpm -ivh --nodeps pdksh-5.2.14-36.el5.i386.rpm
[root@rac2 ~]# yum list|grep ksh
ksh.x86_64 20120801-37.el6_9 @base
pdksh.i386 5.2.14-36.el5 installed
mksh.x86_64 39-7.el6_4.1 l6_latest
[root@rac1 rpm]# rpm -ivh cvuqdisk-1.0.9-1.rpm
[root@rac1 ~]# vi /etc/sysctl.conf
#ORACLE SETTING
fs.aio-max-nr = 1048576
fs.file-max = 6815744
kernel.shmmax = 68719476736
kernel.shmall = 4294967296
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
net.ipv4.ip_local_port_range = 9000 65500
net.core.rmem_default = 262144
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 1048586
在rac1中执行脚本
[root@rac1 rpm]# /u01/app/oraInventory/orainstRoot.sh
[root@rac1 rpm]# /u01/app/11.2.0/grid/root.sh
在rac2执行脚本
[root@rac2 grid]# /u01/app/oraInventory/orainstRoot.sh
[root@rac2 grid]# /u01/app/11.2.0/grid/root.sh
[root@rac1 ~]# /u01/app/oraInventory/orainstRoot.sh
Changing permissions of /u01/app/oraInventory.
Adding read,write permissions for group.
Removing read,write,execute permissions for world.
Changing groupname of /u01/app/oraInventory to oinstall.
The execution of the script is complete.
[root@rac1 ~]# /u01/app/11.2.0/grid/root.sh
Performing root user operation for Oracle 11g
The following environment variables are set as:
ORACLE_OWNER= grid
ORACLE_HOME= /u01/app/11.2.0/grid
Enter the full pathname of the local bin directory: [/usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root script.
Now product-specific root actions will be performed.
Using configuration parameter file: /u01/app/11.2.0/grid/crs/install/crsconfig_params
Creating trace directory
User ignored Prerequisites during installation
Installing Trace File Analyzer
OLR initialization - successful
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding Clusterware entries to upstart
CRS-2672: Attempting to start ‘ora.mdnsd‘ on ‘rac1‘
CRS-2676: Start of ‘ora.mdnsd‘ on ‘rac1‘ succeeded
CRS-2672: Attempting to start ‘ora.gpnpd‘ on ‘rac1‘
CRS-2676: Start of ‘ora.gpnpd‘ on ‘rac1‘ succeeded
CRS-2672: Attempting to start ‘ora.cssdmonitor‘ on ‘rac1‘
CRS-2672: Attempting to start ‘ora.gipcd‘ on ‘rac1‘
CRS-2676: Start of ‘ora.cssdmonitor‘ on ‘rac1‘ succeeded
CRS-2676: Start of ‘ora.gipcd‘ on ‘rac1‘ succeeded
CRS-2672: Attempting to start ‘ora.cssd‘ on ‘rac1‘
CRS-2672: Attempting to start ‘ora.diskmon‘ on ‘rac1‘
CRS-2676: Start of ‘ora.diskmon‘ on ‘rac1‘ succeeded
CRS-2676: Start of ‘ora.cssd‘ on ‘rac1‘ succeeded
ASM created and started successfully.
Disk Group OCR created successfully.
clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user ‘root‘, privgrp ‘root‘..
Operation successful.
CRS-4256: Updating the profile
Successful addition of voting disk 62cb5cc42bdc4ff8bfd1069706eeed4b.
Successfully replaced voting disk group with +OCR.
CRS-4256: Updating the profile
CRS-4266: Voting file(s) successfully replaced
## STATE File Universal Id File Name Disk group
-- ----- ----------------- --------- ---------
1. ONLINE 62cb5cc42bdc4ff8bfd1069706eeed4b (/dev/asm-diskb) [OCR]
Located 1 voting disk(s).
CRS-2672: Attempting to start ‘ora.asm‘ on ‘rac1‘
CRS-2676: Start of ‘ora.asm‘ on ‘rac1‘ succeeded
CRS-2672: Attempting to start ‘ora.OCR.dg‘ on ‘rac1‘
CRS-2676: Start of ‘ora.OCR.dg‘ on ‘rac1‘ succeeded
Configure Oracle Grid Infrastructure for a Cluster ... succeeded
[root@rac1 ~]# su - grid
[grid@rac1 ~]$ crsctl check crs
CRS-4638: Oracle High Availability Services is online
CRS-4537: Cluster Ready Services is online
CRS-4529: Cluster Synchronization Services is online
CRS-4533: Event Manager is online
[grid@rac1 ~]$ crs_stat -t -v
Name Type R/RA F/FT Target State Host
----------------------------------------------------------------------
ora....ER.lsnr ora....er.type 0/5 0/ ONLINE ONLINE rac1
ora....N1.lsnr ora....er.type 0/5 0/0 ONLINE ONLINE rac1
ora.OCR.dg ora....up.type 0/5 0/ ONLINE ONLINE rac1
ora.asm ora.asm.type 0/5 0/ ONLINE ONLINE rac1
ora.cvu ora.cvu.type 0/5 0/0 ONLINE ONLINE rac1
ora.gsd ora.gsd.type 0/5 0/ OFFLINE OFFLINE
ora....network ora....rk.type 0/5 0/ ONLINE ONLINE rac1
ora.oc4j ora.oc4j.type 0/1 0/2 ONLINE ONLINE rac1
ora.ons ora.ons.type 0/3 0/ ONLINE ONLINE rac1
ora....SM1.asm application 0/5 0/0 ONLINE ONLINE rac1
ora....C1.lsnr application 0/5 0/0 ONLINE ONLINE rac1
ora.rac1.gsd application 0/5 0/0 OFFLINE OFFLINE
ora.rac1.ons application 0/3 0/0 ONLINE ONLINE rac1
ora.rac1.vip ora....t1.type 0/0 0/0 ONLINE ONLINE rac1
ora....SM2.asm application 0/5 0/0 ONLINE ONLINE rac2
ora....C2.lsnr application 0/5 0/0 ONLINE ONLINE rac2
ora.rac2.gsd application 0/5 0/0 OFFLINE OFFLINE
ora.rac2.ons application 0/3 0/0 ONLINE ONLINE rac2
ora.rac2.vip ora....t1.type 0/0 0/0 ONLINE ONLINE rac2
ora.scan1.vip ora....ip.type 0/0 0/0 ONLINE ONLINE rac1
[grid@rac1 ~]$ olsnodes -n #.查看集群中节点配置信息
rac1 1
rac2 2
[grid@rac1 ~]$ olsnodes -n -i -s -t
rac1 1 rac1vip Active Unpinned
rac2 2 rac2vip Active Unpinned
[grid@rac1 ~]$ ps -ef|grep lsnr|grep -v ‘grep‘|grep -v ‘ocfs‘|awk ‘{print$9}‘
LISTENER_SCAN1
LISTENER
[grid@rac1 ~]$ srvctl status asm -a
ASM is running on rac2,rac1
ASM is enabled.
[grid@rac1 ~]$ crsctl query css votedisk #查看集群件的表决磁盘信息
## STATE File Universal Id File Name Disk group
-- ----- ----------------- --------- ---------
1. ONLINE 62cb5cc42bdc4ff8bfd1069706eeed4b (/dev/asm-diskb) [OCR]
Located 1 voting disk(s).
只在节点rac1执行即可
进入grid用户下
[root@rac1 ~]# su - grid
利用asmca
[grid@rac1 ~]$ asmca
具体安装截图可参看上一篇rac安装
[root@rac1 ~]# /u01/app/oracle/product/11.2.0/db_1/root.sh
[root@rac2 ~]# /u01/app/oracle/product/11.2.0/db_1/root.sh
[root@rac1 ~]# su - oracel
[oracle@rac1 ~]$ dbca
[grid@rac1 ~]$ crs_stat -t
[grid@rac1 ~]$ crsctl check cluster
[grid@rac1 ~]$ crsctl check crs
[grid@rac1 ~]$ srvctl status database -d bol
$ olsnodes
$ olsnodes -n
$ olsnodes -n -i -s -t
$ crsctl query css votedisk
$ srvctl config scan #查看集群SCAN VIP信息
[grid@rac1 ~]$ srvctl config scan
SCAN name: scanip, Network: 1/10.15.4.0/255.255.252.0/eth0
SCAN VIP name: scan1, IP: /scanip/10.15.7.15
[grid@rac1 ~]$ srvctl config scan_listener #查看集群SCAN Listener信息
SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1521
整个集群的数据库启停
进入grid用户
[grid@rac1 ~]$ srvctl stop database -d bol
[grid@rac1 ~]$ srvctl start database -d bol
[grid@rac1 ~]$ srvctl status database -d bol
关闭所有节点
进入root用户
关闭所有节点
[root@rac1 bin]# pwd
/u01/app/11.2.0/grid/bin
[root@rac1 bin]# ./crs_stat -t -v #确认集群各项资源和服务
[root@rac1 bin]# ./crsctl stop crs #实际只关闭了当前结点
[root@rac1 bin]# ./crsctl stop cluster -all#关闭集群
[root@rac1 bin]# ./crs_stat -t -v
开启
[root@rac1 bin]# ./crs_stat -t -v
[root@rac1 bin]# ./crsctl start cluster -all
[root@rac1 bin]# ./srvctl status database -d bol
[root@rac1 bin]# ./srvctl start database -d bol
[root@rac1 bin]# ./emctl start bol #开启OEM
所有实例和服务的状态
[oracle@rac1 ~]$ srvctl status database -d bol
Instance bol1 is running on node rac1
Instance bol2 is running on node rac2
单个实例的状态
[oracle@rac1 ~]$ srvctl status instance -d bol -i bol1
Instance bol1 is running on node rac1
列出配置的所有数据库
[oracle@rac1 ~]$ srvctl config database
bol
特定节点上节点应用程序的状态
[oracle@rac1 ~]$ srvctl status nodeapps -n rac1
VIP rac1vip is enabled
VIP rac1vip is running on node: rac1
Network is enabled
Network is running on node: rac1
GSD is disabled
GSD is not running on node: rac1
ONS is enabled
ONS daemon is running on node: rac1
ASM 实例的状态
[oracle@rac1 ~]$ srvctl status asm -n rac1
ASM is running on rac1
显示 RAC 数据库的配置
[oracle@rac1 ~]$ srvctl config database -d bol
Database unique name: bol
Database name: bol
Oracle home: /u01/app/oracle/product/11.2.0/db_1
Oracle user: oracle
Spfile: +DATA/bol/spfilebol.ora
Domain:
Start options: open
Stop options: immediate
Database role: PRIMARY
Management policy: AUTOMATIC
Server pools: bol
Database instances: bol1,bol2
Disk Groups: DATA,FRA
Mount point paths:
Services:
Type: RAC
Database is administrator managed
显示节点应用程序的配置 —（VIP、GSD、ONS、监听器）
[oracle@rac1 ~]$ srvctl config nodeapps -n rac1 -a -g -s -l
-n <node_name> option has been deprecated.
Warning:-l option has been deprecated and will be ignored.
Network exists: 1/10.15.4.0/255.255.252.0/eth0, type static
VIP exists: /rac1vip/10.15.7.13/10.15.4.0/255.255.252.0/eth0, hosting node rac1
GSD exists
ONS exists: Local port 6100, remote port 6200, EM port 2016
Warning:-n option has been deprecated and will be ignored.
Name: LISTENER
Network: 1, Owner: grid
Home: <CRS home>
/u01/app/11.2.0/grid on node(s) rac1,rac2
End points: TCP:1521
显示 ASM 实例的配置
[oracle@rac1 ~]$ srvctl config asm -n rac1
Warning:-n option has been deprecated and will be ignored.
ASM home: /u01/app/11.2.0/grid
ASM listener: LISTENER
集群中所有正在运行的实例
SELECT
inst_id
, instance_number inst_no
, instance_name inst_name
, parallel
, status
, database_status db_status
, active_state state
, host_name host
FROM gv$instance
ORDER BY inst_id;
1 1 bol1 YES OPEN ACTIVE NORMAL rac1
2 2 bol2 YES OPEN ACTIVE NORMAL rac2
位于磁盘组中的所有数据文件
select name from v$datafile
union
select member from v$logfile
union
select name from v$controlfile
union
select name from v$tempfile;
属于“OCR”磁盘组的所有 ASM 磁盘
SELECT path
FROM v$asm_disk
WHERE group_number IN (select group_number
from v$asm_diskgroup
where name = ‘OCR‘);
/dev/asm-diskc
/dev/asm-diskd
/dev/asm-diskb
[grid@rac1 ~]$ asmcmd
ASMCMD> ls
DATA/
FRA/
OCR/
ASMCMD> pwd
+DATA/BOL/DATAFILE
#on scan_ip
$ sqlplus "/as sysdba"
create tablespace test datafile ‘+DATA/BOL/DATAFILE/test01.dbf‘ size 50m ;
create tablespace SDE_TBS
logging
datafile ‘+DATA/BOL/DATAFILE/SDE_TBS.dbf‘
size 500m
autoextend on
next 200m maxsize 20480m
extent management local;
create user SDE identified by sde default tablespace SDE_TBS;
grant connect,resource,dba to sde;
SQL> show parameter name;
NAME TYPE VALUE
------------------------------------ ----------- ------------------------------
cell_offloadgroup_name string
db_file_name_convert string
db_name string bol
db_unique_name string bol
global_names boolean FALSE
instance_name string bol1
lock_name_space string
log_file_name_convert string
processor_group_name string
service_names string bol
SQL> select instance_name,status from gv$instance;
INSTANCE_NAME STATUS
---------------- ------------
bol1 OPEN
bol2 OPEN
[grid@rac1 ~]$ srvctl stop listener -n rac1 #关闭监听
[grid@rac1 ~]$ srvctl status listener -n rac1 #查看监听状态
Listener LISTENER is enabled on node(s): rac1
Listener LISTENER is not running on node(s): rac1
[grid@rac1 ~]$ ps -ef |grep -i local=no |wc -l
8
[grid@rac1 ~]$ srvctl stop instance -o immediate -d bol -i bol1 #关闭节点1数据库
[grid@rac1 ~]$ srvctl status database -d bol #查看数据库状态
Instance bol1 is not running on node rac1
Instance bol2 is running on node rac2
[grid@rac1 ~]$ srvctl status instance -d bol -i bol1 #查看节点1数据库状态
Instance bol1 is not running on node rac1
[root@rac1 ~]# cd /u01/app/11.2.0/grid/bin/
[root@rac1 bin]# ./crsctl stop crs
[root@rac1 bin]# ./crs_stat -t -v #查看状态
CRS-0184: Cannot communicate with the CRS daemon.
[root@rac1 bin]# ./srvctl status asm -n rac1 #在rac1节点上执行
PRKH-1010 : Unable to communicate with CRS services.
PRKH-3003 : An attempt to communicate with the CSS daemon failed
[root@rac2 bin]# ./srvctl status asm -n rac1 #在rac2节点上执行
ASM is not running on rac1
$ ps -ef |grep -i ora
$ ps -ef |grep -i asm
#登录scan ip节点，查看连接的实例
select instance_name,status from gv$instance;
#开启rac1
[root@rac1 bin]# ./crs_stat -t
CRS-0184: Cannot communicate with the CRS daemon.
[root@rac1 bin]# ./crsctl start crs
CRS-4123: Oracle High Availability Services has been started.
[root@rac1 bin]# ./srvctl status asm #确保ASM服务已经运行在两个节点上
ASM is running on rac2,rac1
[root@rac1 bin]# ./crs_stat -t -v
Name Type R/RA F/FT Target State Host
----------------------------------------------------------------------
ora.DATA.dg ora....up.type 0/5 0/ ONLINE ONLINE rac1
ora.FRA.dg ora....up.type 0/5 0/ ONLINE ONLINE rac1
ora....ER.lsnr ora....er.type 0/5 0/ ONLINE ONLINE rac2
ora....N1.lsnr ora....er.type 0/5 0/0 ONLINE ONLINE rac2
ora.OCR.dg ora....up.type 0/5 0/ ONLINE ONLINE rac1
ora.asm ora.asm.type 0/5 0/ ONLINE ONLINE rac1
ora.bol.db ora....se.type 0/2 0/1 ONLINE ONLINE rac2
ora.cvu ora.cvu.type 0/5 0/0 ONLINE ONLINE rac2
ora.gsd ora.gsd.type 0/5 0/ OFFLINE OFFLINE
ora....network ora....rk.type 0/5 0/ ONLINE ONLINE rac1
ora.oc4j ora.oc4j.type 0/1 0/2 ONLINE ONLINE rac2
ora.ons ora.ons.type 0/3 0/ ONLINE ONLINE rac1
ora....SM1.asm application 0/5 0/0 ONLINE ONLINE rac1
ora....C1.lsnr application 0/5 0/0 OFFLINE OFFLINE
ora.rac1.gsd application 0/5 0/0 OFFLINE OFFLINE
ora.rac1.ons application 0/3 0/0 ONLINE ONLINE rac1
ora.rac1.vip ora....t1.type 0/0 0/0 ONLINE ONLINE rac1
ora....SM2.asm application 0/5 0/0 ONLINE ONLINE rac2
ora....C2.lsnr application 0/5 0/0 ONLINE ONLINE rac2
ora.rac2.gsd application 0/5 0/0 OFFLINE OFFLINE
ora.rac2.ons application 0/3 0/0 ONLINE ONLINE rac2
ora.rac2.vip ora....t1.type 0/0 0/0 ONLINE ONLINE rac2
ora.scan1.vip ora....ip.type 0/0 0/0 ONLINE ONLINE rac2
[grid@rac1 ~]$ srvctl start instance -d bol -i bol1 #开启集群节点一数据库实例
[grid@rac1 ~]$ srvctl status database -d bol
Instance bol1 is running on node rac1
Instance bol2 is running on node rac2
[grid@rac1 ~]$ crs_stat -t
Name Type Target State Host
------------------------------------------------------------
ora.DATA.dg ora....up.type ONLINE ONLINE rac1
ora.FRA.dg ora....up.type ONLINE ONLINE rac1
ora....ER.lsnr ora....er.type ONLINE ONLINE rac1
ora....N1.lsnr ora....er.type ONLINE ONLINE rac2
ora.OCR.dg ora....up.type ONLINE ONLINE rac1
ora.asm ora.asm.type ONLINE ONLINE rac1
ora.bol.db ora....se.type ONLINE ONLINE rac1
ora.cvu ora.cvu.type ONLINE ONLINE rac2
ora.gsd ora.gsd.type OFFLINE OFFLINE
ora....network ora....rk.type ONLINE ONLINE rac1
ora.oc4j ora.oc4j.type ONLINE ONLINE rac2
ora.ons ora.ons.type ONLINE ONLINE rac1
ora....SM1.asm application ONLINE ONLINE rac1
ora....C1.lsnr application ONLINE ONLINE rac1
ora.rac1.gsd application OFFLINE OFFLINE
ora.rac1.ons application ONLINE ONLINE rac1
ora.rac1.vip ora....t1.type ONLINE ONLINE rac1
ora....SM2.asm application ONLINE ONLINE rac2
ora....C2.lsnr application ONLINE ONLINE rac2
ora.rac2.gsd application OFFLINE OFFLINE
ora.rac2.ons application ONLINE ONLINE rac2
ora.rac2.vip ora....t1.type ONLINE ONLINE rac2
ora.scan1.vip ora....ip.type ONLINE ONLINE rac2
select value from v$parameter where name=‘processes‘;
[root@rac1 bin]# ifconfig
eth0 Link encap:Ethernet HWaddr 08:00:27:0E:DE:0E
inet addr:10.15.7.11 Bcast:10.15.7.255 Mask:255.255.252.0
inet6 addr: fe80::a00:27ff:fe0e:de0e/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3907156 errors:0 dropped:0 overruns:0 frame:0
TX packets:7161180 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:536184469 (511.3 MiB) TX bytes:9769872694 (9.0 GiB)
eth0:1 Link encap:Ethernet HWaddr 08:00:27:0E:DE:0E
inet addr:10.15.7.13 Bcast:10.15.7.255 Mask:255.255.252.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
eth1 Link encap:Ethernet HWaddr 08:00:27:8A:F5:38
inet addr:1.1.1.1 Bcast:1.1.3.255 Mask:255.255.252.0
inet6 addr: fe80::a00:27ff:fe8a:f538/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3636608 errors:0 dropped:0 overruns:0 frame:0
TX packets:3017320 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2524862742 (2.3 GiB) TX bytes:1669614220 (1.5 GiB)
eth1:1 Link encap:Ethernet HWaddr 08:00:27:8A:F5:38
inet addr:169.254.204.165 Bcast:169.254.255.255 Mask:255.255.0.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:2272848 errors:0 dropped:0 overruns:0 frame:0
TX packets:2272848 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1524528859 (1.4 GiB) TX bytes:1524528859 (1.4 GiB)
[root@rac2 bin]# ifconfig
eth0 Link encap:Ethernet HWaddr 08:00:27:33:6D:5A
inet addr:10.15.7.12 Bcast:10.15.7.255 Mask:255.255.252.0
inet6 addr: fe80::a00:27ff:fe33:6d5a/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:8414792 errors:0 dropped:0 overruns:0 frame:0
TX packets:1577797 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:9466367813 (8.8 GiB) TX bytes:172203059 (164.2 MiB)
eth0:1 Link encap:Ethernet HWaddr 08:00:27:33:6D:5A
inet addr:10.15.7.14 Bcast:10.15.7.255 Mask:255.255.252.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
eth0:3 Link encap:Ethernet HWaddr 08:00:27:33:6D:5A
inet addr:10.15.7.15 Bcast:10.15.7.255 Mask:255.255.252.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
eth1 Link encap:Ethernet HWaddr 08:00:27:DC:E4:01
inet addr:1.1.1.2 Bcast:1.1.3.255 Mask:255.255.252.0
inet6 addr: fe80::a00:27ff:fedc:e401/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3017568 errors:0 dropped:0 overruns:0 frame:0
TX packets:3637072 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1669901139 (1.5 GiB) TX bytes:2525032018 (2.3 GiB)
eth1:1 Link encap:Ethernet HWaddr 08:00:27:DC:E4:01
inet addr:169.254.202.95 Bcast:169.254.255.255 Mask:255.255.0.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:848199 errors:0 dropped:0 overruns:0 frame:0
TX packets:848199 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:472739764 (450.8 MiB) TX bytes:472739764 (450.8 MiB)
Centos 6.5 安装Oracle 11g R2 on vbox
标签：where 3.2 测试 spfile tool classpath ipv6 ora EAP